How do I connect the Headspace to the HAPSITE?

Applies to: Chemical and Gas Headspace (GC/MS) | Tickets Solved: 0 | Rank: 1.1

A transfer line is used to connect the Headspace and HAPSITE. Each end is labeled to indicate which instrument lemo port it uses. Check the transfer line carefully before use by performing a visual inspection. Also, make sure that the ends are plugged in correctly and are not forced. Use the attached documents for guidance in the visual inspection and the installation.

Contributed by

Was this helpful? Yes No

Keywords: transfer, line, lemo, port, labeled, inspect, damage